• 81619276



• Model No.:WS2850B 
• To provide better service for our customer,we designed the high brightness 5050 RGB LED;“
• After open the package, the LED should be kept at 25oC, 65 % RH environment or less.  
• The LED should be soldered within 6 hours after opening the package.
• The LAMP  LED is an ESD sensitive device. All the equipment and machine must be  properly grounded.
• Strongly recommend design the board according setting current other than setting voltage .if you are really need setting voltage type please consider there may cause influence arise by difference voltage of difference LED
•The outer voltage change will bring the current index change .unsuitable design and current control,easy cause LED fail .for example excess current will cause LED life short or even burn down , too little electricity will cause lacking light
  • 兑换热线
  • 服务热线
  • Worldsemi
  • Spring
  • Aimee