Part | Summary | Circuit Application | Download |
---|---|---|---|
WS2850B |
• Model No.:WS2850B
• To provide better service for our customer,we designed the high brightness 5050 RGB LED;“
• After open the package, the LED should be kept at 25oC, 65 % RH environment or less.
• The LED should be soldered within 6 hours after opening the package.
• The LAMP LED is an ESD sensitive device. All the equipment and machine must be properly grounded.
• Strongly recommend design the board according setting current other than setting voltage .if you are really need setting voltage type please consider there may cause influence arise by difference voltage of difference LED
•The outer voltage change will bring the current index change .unsuitable design and current control,easy cause LED fail .for example excess current will cause LED life short or even burn down , too little electricity will cause lacking light
|
![]() |
Download |
WS2850B-B |
• WS2850B-B:Black Verison;
• To provide better service for our customer,we designed the high brightness 5050 RGB LED;
• After open the package, the LED should be kept at 25oC, 65 % RH environment or less.
• The LED should be soldered within 6 hours after opening the package.
• The LAMP LED is an ESD sensitive device. All the equipment and machine must be properly grounded.
• Strongly recommend design the board according setting current other than setting voltage .if you are really need setting voltage type please consider there may cause influence arise by difference voltage of difference LED
•The outer voltage change will bring the current index change .unsuitable design and current control,easy cause LED fail .for example excess current will cause LED life short or even burn down , too little electricity will cause lacking light
|
![]() |
Download |
WS2850-T |
• Model No.:WS2850-Transparent Verison;
• To provide better service for our customer,we designed the high brightness 5050 RGB LED;
• After open the package, the LED should be kept at 25oC, 65 % RH environment or less.
• The LED should be soldered within 6 hours after opening the package.
• The LAMP LED is an ESD sensitive device. All the equipment and machine must be properly grounded.
• Strongly recommend design the board according setting current other than setting voltage .if you are really need setting voltage type please consider there may cause influence arise by difference voltage of difference LED
•The outer voltage change will bring the current index change .unsuitable design and current control,easy cause LED fail .for example excess current will cause LED life short or even burn down , too little electricity will cause lacking light
|
![]() |
Download |
WS2835 |
• Model No.:WS2835-3528 Verison;
• View angle:120 deg;
• The materials of the LED is InGaN;
• Dimension:3.5mmx2.8mmx1.40mm SMT-LED;
• Lens Appearance:Clean like water,transparent;
• RoHS complaint lead-free soldering compatible;
• Standard Packge:2000pcs per reel;
|
![]() |
Download |
WS3535 |
• To provide better service for our customer,we designed the high brightness 3535 RGB LED;“
• After open the package, the LED should be kept at 25oC, 65 % RH environment or less.
• The LED should be soldered within 6 hours after opening the package.
• The LAMP LED is an ESD sensitive device. All the equipment and machine must be properly grounded.
• Strongly recommend design the board according setting current other than setting voltage .if you are really need setting voltage type please consider there may cause influence arise by difference voltage of difference LED
•The outer voltage change will bring the current index change .unsuitable design and current control,easy cause LED fail .for example excess current will cause LED life short or even burn down , too little electricity will cause lacking light
|
![]() |
Download |
WS3030 |
• To provide better service for our customer,we designed the high brightness 3030 RGB LED;“
• After open the package, the LED should be kept at 25oC, 65 % RH environment or less.
• The LED should be soldered within 6 hours after opening the package.
• The LAMP LED is an ESD sensitive device. All the equipment and machine must be properly grounded.
• Strongly recommend design the board according setting current other than setting voltage .if you are really need setting voltage type please consider there may cause influence arise by difference voltage of difference LED
•The outer voltage change will bring the current index change .unsuitable design and current control,easy cause LED fail .for example excess current will cause LED life short or even burn down , too little electricity will cause lacking light
|
![]() |
Download |